tháng 6 22, 2014
If you don't have one of these boards yet, this was everything we made in my Punch Board Class a few weeks ago and I'll have more tutorials to show you later:
Here is the post that shows you close-up pictures: HERE and a tutorial on how to create the camera card: HERE.
Okay, let's move on to the tutorial. Grab your punch board and follow me!
Step 1, Bow 1:
You will need 3 pieces of designer paper: (1) measuring 6" x 1", (1) measuring 3 1/2" x 1" and (1) 1/4" x 1 1/4".
Step 2:
Using your Envelope Punch Board, slide your 6" piece of designer paper in the cutter so that the edge of your paper is even with the "hole" on the left-hand edge. Just like the photo above.
Step 3:
Press on the button to punch and this is what your strip should look like.
Step 4:
Flip your paper over and repeat Step 2 & 3 so that both sides are punched.
Step 5:
Repeat on the other side so all four ends are punched and look like the photo above.
Step 6:
Position your paper at the 3" mark on your Envelope Punch Board and punch. Flip your paper over and repeat so that your paper strip looks like the photo below:
Step 7:
Using your Bone Folder, run it across both ends of your paper so that the ends curl.
Step 8:
Apply glue to the center of your paper and flip the ends so that they meet in the center. Press in place to form your bow.
Step 9:
Using designer paper piece #2, line up the paper at the 1 3/4" mark on your Envelope Punch Board and punch. Flip your paper over and repeat for the 2nd side.
Step 10:
Now you will create the tails at both ends. Center the end at the "hole" and punch. Repeat for side 2.
Step 11:
Apply glue to the center of your tail and press bow in place to layer as shown below:
Step 12:
Wrap the 1/4" each wide piece around the center of your bow and glue in place!
Bow #2:
Create all of the pieces as you did for the first bow as shown above. Wrap the 1/4" piece around the center of your bow.
For the tail, all you do is bend it to shape it as I show in the above picture and glue and layer the bow on top as shown below:
For bow #3, the only difference is the tail is longer. Instead of a 3 1/2" piece you will need a 5" piece and follow the steps for bow 1:
You will bend the tail as you did for bow #2 but bend it slightly more to create the look below:
Wrap your 1/4" piece around the bow and assemble your bow as your did for bow #2:
How fun and easy was that? You can make any color bow to match a card or a package! Next week I will be showing you how to make the cute little box!
Không có nhận xét nào
Đăng nhận xét